SAFEGAS SKY3000-WH

Technical parameters 

• Gas Detected : O2/ CO/ H2S/ EX is the standard gas combine, other combine can be specified.
  
• Detection Principle : Electrochemical(O2, CO, H2S), Catalytic combustion(EX). Specified according to sensors.
  
• Measure range : Specified according to application.
  
• Resolution : Specified according to application
  
• Response time : ≤ 30 seconds
  
• Precision : ≤ ± 1-5%F.S except for special gases
  
• Language : Chinese/English/Russian/Polish (More language can be customized)
  
• Automatically test and calibrate after power-on : Including reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
  
• Unit : PPM, mg/m3, %LEL, %VOL
  
• Display : LCD (160 x96) ,180° rotate
  
• Backlight : Turned on automatically when alarming, the backlight
  time can be manually set
  
• Data record : 100,000 readings, the storage interval is adjustable from 5 to 3600 seconds, data can be exported to PC no need software
  
• Alarm : 95dB@30cm buzzer alarm, flashing red LED alarm and vibration alarm.Alarm status indication on the screen, alarm latched; diagnostic alarm and battery under-voltage alarm, pump failure alarm; man down alarm
  
• Battery : 3.7V rechargeable lithium battery, battery capacity 2200mA
  
• Working hours : More than 15 hours in continuous pumping mode
  
• Charger : Travel charger with DC interface, charging time ≥ 4 hours
  
• Working temperature : -20℃~+50℃
  
• Explosion-proof grade：IECEx: Ex ia IIC T4 Ga
  ATEX : Ex II 1G Ex ia IIC T4 Ga
  
• Working Humidity : 86～106Kpa
  
• Protection grade : IP67
  
• Size : 157*84.5*59.5mm (including back clip/water trap filter) (length * width * height)